Propriété du filtre CSS
Exemple
Changez toutes les images en noir et blanc (100 % de gris) :
img {
filter: grayscale(100%);
}
Conseil : Plus d'exemples "Essayez-le vous-même" ci-dessous.
Définition et utilisation
La filter
propriété définit les effets visuels (comme le flou et la saturation) sur un élément (souvent <img>).
Valeur par défaut: | rien |
---|---|
Hérité: | non |
Animable : | Oui. En savoir plus sur l'animation |
Version: | CSS3 |
Syntaxe JavaScript : | objet .style.filter="niveaux de gris (100%)" |
Prise en charge du navigateur
Les nombres dans le tableau indiquent la première version du navigateur qui prend entièrement en charge la propriété.
Les nombres suivis de -webkit- spécifient la première version qui a fonctionné avec un préfixe.
Property | |||||
---|---|---|---|---|---|
filter | 53.0 18.0 -webkit- |
13.0 | 35.0 | 9.1 6.0 -webkit- |
40.0 15.0 -webkit- |
Syntaxe CSS
filter: none | blur() | brightness() | contrast() | drop-shadow() | grayscale() | hue-rotate() | invert() | opacity() | saturate() | sepia() | url();
Conseil : Pour utiliser plusieurs filtres, séparez chaque filtre par un espace (voir "Plus d'exemples" ci-dessous).
Fonctions de filtrage
Remarque : Les filtres qui utilisent des valeurs en pourcentage (c'est-à-dire 75 %), acceptent également la valeur décimale (c'est-à-dire 0,75).
Filter | Description | Play it |
---|---|---|
none | Default value. Specifies no effects | |
blur(px) | Applies a blur effect to the image. A larger value will create more blur. If no value is specified, 0 is used. |
|
brightness(%) | Adjusts the brightness of the image. 0% will make the image completely black. 100% (1) is default and represents the original image. Values over 100% will provide brighter results. |
|
contrast(%) | Adjusts the contrast of the image. 0% will make the image completely black. 100% (1) is default, and represents the original image. Values over 100% will provide results with more contrast. |
|
drop-shadow(h-shadow v-shadow blur spread color) | Applies a drop shadow effect to the image. Possible values: h-shadow - Required. Specifies a pixel value for the horizontal shadow. Negative values place the shadow to the left of the image. v-shadow - Required. Specifies a pixel value for the vertical shadow. Negative values place the shadow above the image. blur - Optional. This is the third value, and must be in pixels. Adds a blur effect to the shadow. A larger value will create more blur (the shadow becomes bigger and lighter). Negative values are not allowed. If no value is specified, 0 is used (the shadow's edge is sharp). spread - Optional. This is the fourth value, and must be in pixels. Positive values will cause the shadow to expand and grow bigger, and negative values will cause the shadow to shrink. If not specified, it will be 0 (the shadow will be the same size as the element). Note: Chrome, Safari and Opera, and maybe other browsers, do not support this 4th length; it will not render if added. color - Optional. Adds a color to the shadow. If not specified, the color depends on the browser (often black). An example of creating a red shadow, which is 8px big both horizontally and vertically, with a blur effect of 10px: filter: drop-shadow(8px 8px 10px red); Tip: This filter is similar to the box-shadow property. |
|
grayscale(%) | Converts the image to grayscale. 0% (0) is default and represents the original image. 100% will make the image completely gray (used for black and white images). Note: Negative values are not allowed. |
|
hue-rotate(deg) | Applies a hue rotation on the image. The value defines the number of degrees around the color circle the image samples will be adjusted. 0deg is default, and represents the original image. Note: Maximum value is 360deg. |
|
invert(%) | Inverts the samples in the image. 0% (0) is default and represents the original image. 100% will make the image completely inverted. Note: Negative values are not allowed. |
|
opacity(%) | Sets the opacity level for the image. The opacity-level describes the transparency-level, where: 0% is completely transparent. 100% (1) is default and represents the original image (no transparency). Note: Negative values are not allowed. Tip: This filter is similar to the opacity property. |
|
saturate(%) | Saturates the image. 0% (0) will make the image completely un-saturated. 100% is default and represents the original image. Values over 100% provides super-saturated results. Note: Negative values are not allowed. |
|
sepia(%) | Converts the image to sepia. 0% (0) is default and represents the original image. 100% will make the image completely sepia. Note: Negative values are not allowed. |
|
url() | The url() function takes the location of an XML file that specifies an SVG filter, and may include an anchor to a specific filter element. Example: filter: url(svg-url#element-id) |
|
initial | Sets this property to its default value. Read about initial | |
inherit | Inherits this property from its parent element. Read about inherit |
Plus d'exemples
Exemple de flou
Appliquer un effet de flou à l'image :
img {
filter: blur(5px);
}
Flou Exemple 2
Appliquez une image d'arrière-plan flou :
img.background {
filter: blur(35px);
}
Exemple de luminosité
Réglez la luminosité de l'image :
img {
filter: brightness(200%);
}
Exemple de contraste
Réglez le contraste de l'image :
img {
filter: contrast(200%);
}
Exemple d'ombre portée
Appliquez un effet d'ombre portée à l'image :
img {
filter: drop-shadow(8px 8px 10px
gray);
}
Exemple en niveaux de gris
Convertissez l'image en niveaux de gris :
img {
filter: grayscale(50%);
}
Exemple de rotation de teinte
Appliquer une rotation de teinte sur l'image :
img {
filter: hue-rotate(90deg);
}
Inverser l'exemple
Inversez les échantillons dans l'image :
img {
filter: invert(100%);
}
Exemple d'opacité
Définissez le niveau d'opacité de l'image :
img {
filter: opacity(30%);
}
Saturer Exemple
Saturer l'image :
img {
filter: saturate(800%);
}
Exemple sépia
Convertissez l'image en sépia :
img {
filter: sepia(100%);
}
Utilisation de plusieurs filtres
Pour utiliser plusieurs filtres, séparez chaque filtre par un espace. Notez que l'ordre est important (c'est-à-dire que l'utilisation de grayscale() après sepia() donnera une image complètement grise) :
img {
filter: contrast(200%) brightness(150%);
}
Tous les filtres
Une démonstration de toutes les fonctions de filtrage :
.blur {
filter: blur(4px);
}
.brightness {
filter: brightness(0.30);
}
.contrast {
filter: contrast(180%);
}
.grayscale {
filter: grayscale(100%);
}
.huerotate {
filter: hue-rotate(180deg);
}
.invert {
filter: invert(100%);
}
.opacity {
filter: opacity(50%);
}
.saturate {
filter: saturate(7);
}
.sepia {
filter: sepia(100%);
}
.shadow {
filter: drop-shadow(8px 8px 10px green);
}
Pages connexes
Tutoriel CSS : Images CSS
Référence HTML DOM : propriété du filtre